METHOD 1 MEASURE OUR PRINTABLE PDF RING SIZER

We recommend that you print our simple Ring Sizing Guide PDF and read the instructions carefully. Before you print, be sure to check that page scaling is set to "none" on your print dialog box. In order to view this guide, you will need to use Adobe.

DOWNLOAD PDF

 

METHOD 2 MEASURE YOUR FINGER WITH A RULER

  • 1 - Get a non-stretchy string or paper about 6" long and 1/4" wide.
  • 2 - Wrap around the base of your finger. It has to fit snug, but not too tight.
  • 3 - Mark the point on the string/paper where it overlaps forming a circle.
  • 4 - Compare the length of the string/paper to the chart. That is your ring size.

*If you are between sizes, order a larger size.

 

RING FINGER MEASURING TIPS

Make sure your finger is at a normal body temperature -- fingers can shrink or expand when cold or hot. If your knuckle is much larger than your finger’s base, take two separate measurements and choose a size in between. You want a ring to fit over your knuckle, but not be too loose or it will shift around.

The thicker the ring, the tighter the fit, so if you choose a ring with a deep band width, you will likely need to go one size up.

The best time of day to measure is in the evening, when your fingers are largest. Avoid measuring when you’re cold, as fingers are at least half a size smaller.

 

INTERNATIONAL RING SIZE CHART

Inside Diameter  Inside Circumference Sizes
MM Inches MM Inches British & Australian  US & Canada French & Russian German Japanese Swiss
9.91 0.390 31.13 1.22 - 0000 - - - -
10.72 0.442 33.68 1.39 - 00 - - - -
11.53 0.454 36.22 1.43 - 0 - - - -
11.95 0.474 37.54 1.49 A 1/2 - - - -
12.18 0.482 38.26 1.51 A 1/2 3/4 - - - -
12.37 0.487 38.86 1.53 B 1 - - 1 -
12.60 0.496 39.58 1.56 B 1/2 1 1/4 - - - -
12.78 0.503 40.15 1.58 C 1 1/2 - - - -
13.00 0.512 40.84 1.61 C 1/2 1 3/4 - - - -
13.21 0.520 41.50 1.63 D 2 41 1/2 13 1/2 2 1 1/2
13.41 0.528 42.13 1.66 D 1/2 2 1/4 - - - -
13.61 0.536 42.76 1.68 E 2 1/2 42 3/4 13 3/4 3 2 3/4
13.83 0.544 43.45 1.71 E 1/2 2 3/4 - - - -
14.05 0.553 44.14 1.74 F 3 44 14 4 4
14.15 0.557 44.45 1.75 F 1/2 3 1/8 - - - -
14.25 0.561 44.77 1.76 F 3/4 3 1/4 - - - -
14.36 0.565 45.11 1.77 G 3 3/8 45 1/4 - 5 5 1/4
14.45 0.569 45.40 1.79 G 1/4 3 1/2 - 14 1/2 - -
14.56 0.573 45.74 1.80 G 1/2 3 5/8 - - 6 -
14.65 0.577 46.02 1.81 H 3 3/4 46 1/2 - - 6 1/2
14.86 0.585 46.68 1.84 H 1/2 4 - 15 7 -
15.04 0.592 47.25 1.86 I 4 1/4 47 3/4 - - 7 3/4
15.27 0.601 47.97 1.89 I 1/2 4 1/2 - 15 1/4 8 -
15.40 0.606 48.38 1.90 J 4 5/8 49 15 1/2 - 9
15.53 0.611 48.79 1.92 J 1/4 4 3/4 - - - -
15.70 0.618 49.32 1.94 J 1/2 5 - 15 3/4 9 -
15.80 0.622 49.64 1.95 K 5 1/8 50 - - 10
15.90 0.626 49.95 1.97 K 1/4 5 1/4 - - - -
16.00 0.630 50.27 1.98 K 1/2 5 3/8 - - 10 -
16.10 0.634 50.58 1.99 L 5 1/2 51 3/4 16 - 11 3/4
16.30 0.642 51.21 2.02 L 1/4 5 3/4 - - - -
16.41 0.646 51.55 2.03 L 1/2 5 7/8 - - - -
16.51 0.650 51.87 2.04 M 6 52 3/4 16 1/2 12 12 3/4
16.71 0.658 52.50 2.07 M 1/2 6 1/4 - - - -
16.92 0.666 53.16 2.09 N 6 1/2 54 17 13 14
17.13 0.674 53.82 2.12 N 1/2 6 3/4 - - - -
17.35 0.683 54.51 2.15 O 7 55 1/4 17 1/4 14 15 1/4
17.45 0.687 54.82 2.16 O 1/2 7 1/4 - - - -
17.75 0.699 55.76 2.20 P 7 1/2 56 1/2 17 3/4 15 16 1/2
17.97 0.707 56.45 2.22 P 1/2 7 3/4 - - - -
18.19 0.716 57.15 2.25 Q 8 57 3/4 18 16 17 3/4
18.35 0.722 57.65 2.27 Q 1/2 8 1/4 - - - -
18.53 0.729 58.21 2.29 Q 3/4 8 1/2 - 18 1/2 17 -
18.61 0.733 58.47 2.30 R 8 5/8 59 - - 19
18.69 0.736 58.72 2.31 R 1/4 8 3/4 - - - -
18.80 0.740 59.06 2.32 R 1/2 8 7/8 - - - -
18.89 0.748 59.34 2.35 R 3/4 9 - 19 18 -
19.10 0.752 60.00 2.36 S 9 1/8 60 1/4 - - 20 1/4
19.22 0.757 60.38 2.38 S 1/4 9 1/4 - - - -
19.31 0.760 60.66 2.39 S 1/2 9 3/8 - - - -
19.41 0.764 60.98 2.40 S 3/4 9 1/2 - 19 1/2 19 -
19.51 0.768 61.29 2.41 T 9 5/8 61 1/2 - - 21 1/2
19.62 0.772 61.64 2.43 T 1/4 9 3/4 - - - -
19.84 0.781 62.33 2.45 T 1/2 10 - 20 20 -
20.02 0.788 62.89 2.48 U 10 1/4 62 3/4 - 21 22 3/4
20.20 0.797 63.46 2.50 U 1/2 10 1/2 - 20 1/4 22 -
20.32 0.800 63.84 2.51 V 10 5/8 63 - - 23 3/4
20.44 0.805 64.21 2.53 V 1/4 10 3/4 - - - -
20.68 0.814 64.97 2.56 V 1/2 11 - 20 3/4 23 -
20.76 0.817 65.22 2.57 W 11 1/8 65 - - 25
20.85 0.821 65.50 2.58 W 1/4 11 1/4 - - - -
20.94 0.824 65.78 2.59 W 1/2 11 3/8 - - - -
21.08 0.830 66.22 2.61 W 3/4 11 1/2 - 21 24 -
21.18 0.834 66.54 2.62 X 11 5/8 66 1/4 - - 26 1/4
21.24 0.836 66.73 2.63 X 1/4 11 3/4 - - - -
21.30 0.839 66.92 2.64 X 1/2 11 7/8 - - - -
21.49 0.846 67.51 2.66 Y 12 67 1/2 21 1/4 25 27 1/2
21.69 0.854 68.14 2.68 Y 1/2 12 1/4 - - - -
21.89 0.862 68.77 2.71 Z 12 1/2 68 3/4 21 3/4 26 28 3/4
22.10 0.870 69.43 2.73 Z +1/2 12 3/4 - - - -
22.33 0.879 70.15 2.76 Z+1 13 - 22 27 -
22.60 0.890 71.00 2.80 Z+1.5 13.5 - - - -
22.69 0.893 71.28 2.81 Z+2 - - - - -
22.92 0.902 72.00 2.83 Z+2.5 - - - - -
23.06 0.908 72.45 2.85 Z+3 - - - - -
23.24 0.915 73.01 2.87 Z+3.5 - - - - -
23.47 0.924 73.73 2.90 Z+4 - - - - -
23.55 0.927 73.98 2.91 Z+4.5 - - - - -
23.87 0.940 74.99 2.95 Z+5 - - - - -
24.27 0.956 76.25 3.00 Z+6 - - - - -

 

Tip : If in doubt most jewellers will measure your ring size free of charge.

You have successfully subscribed!
ico-collapse
0
ic-cross-line-top
Top
ic-expand
ic-cross-line-top